Model No.: YMJ-CM-90
Full auto RFID converting machine is used for label converting and die cutting, 3 layers or 4 layers of roll to roll dry and wet inlay converting with label is optional. Inlay converting and die cutting with balance or imbalance printing layer just need to setting in software. It integrated of online gluing, converting, die cutting and testing. It applicable to roll label, paper card, swing tag, folding card and other product production. The solution of full auto modular system and multi-axis system which equip with Multi-axis synchronization function. Module configuration is reasonable, flexible and humanized combination. Machine has multi unit of tension and deviation correction systems which ensure the edges neatly, high output, high quality and high accuracy production for different products.
1. Constant tension retracting roll ,with independent servo control ,break alarm protection ,and gas rising shaft automatic inflation.
2. There is a feeding platform in each layer, which is convenient for changing. User-friendly design, easy to operate.
3. The high-precision correction system is adopted, the ultrasonic sensor is monitored in real time, and the material in motion is corrected in real time. The correction accuracy is ±0.1mm, which ensures the composite precision of the label.
4. Each group of power units consists of anti-static and anti-adhesive rubber roller and precision hard oxide roller to prevent chip and material from being crushed during material movement.
5. After the material enters each power group, or composite, after the die cutting station, there is a set of ion static elimination mechanism to eliminate the static electricity generated in the material production and ensure that the chip or material is not damaged by static electricity.
6. Depending on the product, equipment 0-3 can be glued, and batch or continuous glue can be selected. The high-precision pressure regulating valve ensures the stability of the glue amount when the production speed is switched.
7. The unique cutting mechanism can cut off the antenna when it is used to produce antennas with different spacings , and then re-attach it to the coil. The sensor can monitor the position and the spacing can be set, which is flexible and convenient. In the production of wet Inlay, this mechanism can cooperate with the labeling mechanism, peel off the wet inlay and transfer it to the strip to achieve the wet inlay transfer.
8. After each layer of material is compounded or die-cut, a vision system can be added to detect the size of the composite and die-cutting on-line, and the alarm is automatically stopped.
9. There is a set of ion static elimination mechanism to eliminate the static electricity generated in the material production and ensure that the chip or material is not damaged by static electricity.
10. High-precision round die cutter, 2-3 sets of optional, high-precision sensors for precise positioning to ensure die cutting accuracy . Different shapes of die cutters are available for different products. Full or half cut can be selected for the roll label or tag.
11. HF or UHF card reader is optional, and the chip detection before receiving the chip. Bad mark inkjet dot making sign. Multiple sets of inspection and marking can be added after double-row or above product slitting.
12. According to different products, you can add cards or tags, bill receipts.
13. For small batch orders, an optional strip pull-down mechanism is available to adjust the die-cut spacing.
14. The die-cutting mechanism is equipped with a hydraulic detection system to detect the die-cutting pressure in real time, control the die-cutting depth, and ensure the die-cutting accuracy.
15. The gap between each group of composite rollers can be adjusted according to different products through the barometer. The adjustment range is 0~2mm and the adjustment precision is 0.05mm.
16. The waste is automatically collected after die cutting, and the coils are collected neatly.
Controlling system :Keyence PLC +PC
Servo system :Mitsubishi motors Japan
Suction machine : China-made
Lead screw :HIWIN
Guide strip slide:HIWIN
The power supply :MEANWELL
Solenoid valve :SMC
Vacuum generator :SMC
Vacuum pump :SMC
Tension control :China-made /Imports optional
Geared motor :Import
Ultrasonic Correction System :China-made /Imports optional
Gluing system :China-made /Imports optional
Overall Dimension :About L4820*W1230*H2200 m
Weight :About 2500kg
Power Supply :AC380V 50/60HZ 70A
Air Pressure :6KG/CM²
Outer Diameter of Core : Max. 600mm
Inner Diameter of Core :76mm
Bonding Accuracy :±0.02~0.03mm
Applicable Material :Different sizes of dry Inlay or wet Inlay
Width of Material :20mm---180mm width
Pass Rate :99.9%
Shenzhen Yuanmingjie Technology Co., Ltd. has been among the leading intelligent machine manufacturer in China since the founding year 2010
Yuanmingjie specialized in R&D, Assembly, Design, Sales of RFID machine, Smart Card machine and IOT one window solution.
After tireless efforts under supervision of top engineers and R&D teams, Yuanmingjie develop and start manufacturing state of the contact cards machine, Contactless cards machine, Dual interface Cards machine, RFID machine and highly customized automated machine as our main products. Yuanmingjie also is among first manufacturer in china to use ultrasonic technology to embed the wire into PVC and Vibrating feeding technology.
We have advanced technology equipped with cutting edge technology for improving reliability, and performance. Our leading technology and experience has helped all our customers to succeed. Cost effective top quality eco-friendly customized solutions with life time after sales service support is our first priority.
- Company Name: ShenZhen YuanMingJie Technology Co., Ltd.
- Representative: Liming Li
- Product/Service: Smart Card Production Line , Contact Smart Card Production Line , Contactless Smart Card Production Equipment , Dual Interface Smart Card Production Line , Smart Card Machine , Accessories of Smart Card Machine
- Capital (Million US $): 3,900,000RMB
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 4
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: no
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: 9th Songyu Road, Songgang Street, Shenzhen, China
- Contact Person: Mr. bencol
- Tel: 86-0755-27918093-8021
Premium Related Products